SINYIFENG TECHNOLOGY CO., LTD.

I.             Connect the red wire to +VCC.

II.           Connect the black wire to Ground

III.         Connect the Output wire to light +VCC

IV.          The remote control operate :

1.           Press  Button『A』: Turn on            

2.           Press  Button『B』:

Press 1 second to change flash pattern;

press 3 seconds, the pattern will be steady burn;

then 6 lights can be lighted together.

Quickly press three times, all lights will reset to pattern 1.

3.           Button 『C』: Turn off.

4.           Remote control use one-piece 3V  2032 battery.

5.           Flash Patterns: 16 flash patterns